4x32 scope zero in

Discussion in 'Barnett Crossbows' started by outrunner13, Sep 5, 2010.

  1. outrunner13

    outrunner13 New Member

    Messages:
    181
    Likes Received:
    3
    Location:
    brooksville fla
    what are the ranges to zero in i need the zero in ranges 4 each line pleasehelp
     
  2. BigBowMan

    BigBowMan Happy Member

    Messages:
    2,344
    Likes Received:
    1,174
    Location:
    Ripon, WI
  3. outrunner13

    outrunner13 New Member

    Messages:
    181
    Likes Received:
    3
    Location:
    brooksville fla
    got it thanks
     
  4. outrunner13

    outrunner13 New Member

    Messages:
    181
    Likes Received:
    3
    Location:
    brooksville fla
    finely got it to zero at 40-50 yds but here the new problem now its 6-8 in low now at 30 yds it take 200 plus turns down to get it to 40-50 yds i,m shooting barnett factory 20in arrows 125 grs field tips i,ll think its a bad scope help this is driving me nuts please help thanks ray
     
  5. outrunner13

    outrunner13 New Member

    Messages:
    181
    Likes Received:
    3
    Location:
    brooksville fla
    found problem bad scope will replace on fri
     
  6. outrunner13

    outrunner13 New Member

    Messages:
    181
    Likes Received:
    3
    Location:
    brooksville fla
    got the new scope today its back to the way it wuz a smoker thanks to the barnett staff thanks again mark
     

Share This Page