Any sts systems out there that fit the Middletons?
0
5 replies to this topic
#2
Gary Kehne
-
- Members
- 75 posts
Junior Member
Posted 14 September 2011 - 08:46 AM
Yes, but modifacations have to be made to the pod, (riser).Really don't think it is worth the effort. However -------------.
#3
the dog
-
- Members
- 107 posts
Member
Posted 15 September 2011 - 12:07 PM
I made my own
2 angle clips, 2 bolts, 2 threaded rods with bumpers on them. double nut the threaded rods to set the correct horizontal distance to the string
works very good.
2 angle clips, 2 bolts, 2 threaded rods with bumpers on them. double nut the threaded rods to set the correct horizontal distance to the string
works very good.
#4
skg2004
-
- Members
- 138 posts
Member
- LocationOhio
Posted 15 September 2011 - 05:50 PM
Really not an STS, but you can use the excal S5 system. It is actually very adjustable on the Middelton. It just requires 2 washers when you tighten them to keep from sliding. I had them on a the first month or two after I got the 375, honestly though, I noticed nothing different and took them off and back to Dunhams.
Its not the kill, its the thrill of the chase
#5
bowhunter-57
-
- Members
- 93 posts
Member
Posted 15 September 2011 - 06:25 PM
What are Dunhams?
If it's got fur,feathers,or scales it's in trouble
Excal Exocet 175
Middleton DTM330
S/W 44Mag.
#6
skg2004
-
- Members
- 138 posts
Member
- LocationOhio
Posted 15 September 2011 - 07:20 PM
bowhunter-57, on 15 September 2011 - 06:25 PM, said:
What are Dunhams?
Its not the kill, its the thrill of the chase
