8 replies to this topic

[bellasdad]

Howdy, I have been a lifelong conventional archery nut but am new to the crossbow game. I would like to know how to refletch flat nocked bolts that don't have the regular nock grooves to anchor them in an arrow fletching jig. If I need to buy a new jig or tool please advise which is your favorite and why? Any and all tips and tricks pertaining to that jig would be greatly appreciated. thanks in advance. BB

PS: I will be refletching excalibur carbon firebolts with luminoks.

Edited by bellasdad, 29 January 2012 - 09:33 AM.

[BD1]

Bitzenburger Crossbow Bolt Fletching Jig or If u have a jig they have a Cat #3020 Crossbow Nock Receiver

[mattador96]

Quite a few crossbow arrows don't fit into that nock receiver. I have one

[rock74]

mattador96, on 29 January 2012 - 12:39 PM, said:

Quite a few crossbow arrows don't fit into that nock receiver. I have one

mattador is right i ran into the same problem my laser 2's fit and the laser 4's didnt i use the carbon express nock adapter it slips on the shaft like a slip on eraser does to a pencil and there inexpensive.

[H&S Archer]

carbon express nock adapter ditto

[dropzone]

With a flat nock you don't need to index the nock. You just orient the arrow to where you want the cock vane and fletch it. If you are talking about the arrow not fitting the nock receiver you can also go to a archery shop a pick up a aluminum arrow nock that fits over the shaft and use it.

[bellasdad]

thanks for all the replies. I ordered both the nock adapter and the carbon express adaptor. BB

[Jack Pine]

http://www.crossbown...__1#entry120317

[dropzone]

Jack that is a good idea!