16 replies to this topic

[Zrt1200]

If you own a Bitz jig and found that you nock tool is loose I found a product that should do the job very well. I just bought a used jig today and will be ordering one of these kits for my self as it increases accuracy. You will need to page about 1/2 way down the page. Here's a link,,,

http://www.zenitharchery.com/home.htm

Attached Files

•  bitzenburger.jpg   25.77K   8 downloads

[Urban Legend]

But does it do crossbow arrows?

[BD1]

YES

[Urban Legend]

Cool.

[Corky]

I've read Bitzenburger's ads... they say they do Xbows. Someone said when doing Xbows, Bitzen has a nock problem... dunno, being new to all this, but that's what I've heard.

Corky

[Zrt1200]

Corky, on 05 February 2012 - 02:34 PM, said:

I've read Bitzenburger's ads... they say they do Xbows. Someone said when doing Xbows, Bitzen has a nock problem... dunno, being new to all this, but that's what I've heard.

Corky

Yes, Moon said the crossbow nock reciever is too loose. This set up fixes that problem as well as aligns the arrow more accurately!!

UL, Yes this set up will do crossbow arrows as well.

Update
Not sure after talking to him today. See my latest post!!

Edited by Zrt1200, 06 February 2012 - 08:20 PM.

[BD1]

Just ordered one!!!

[Zrt1200]

BD1, on 05 February 2012 - 04:20 PM, said:

Just ordered one!!!

I am calling in the Morning and ordering extra arrow sleeves with it. You never know??

[Zrt1200]

Well, I ordered my kit today from them and was talking to them about crossbow arrows. His adaptor rings DO Not Fit crossbow arrows from what I understand?? What you need to do is take a arrow insert and make it fit the adaptor ring. We will see when I get it. I will post one way or the other on it.

[BD1]

Zenith doesn't make a fitting to fit .300 shafts, What is everyone using for this?

[BD1]

Made a insert up at work total length is 1" , 1/2" in trun nob & 1/2" to slip shaft on roughly .300 in dia.

[Zrt1200]

That will work Sweet!! Nice Job!!!

[H&S Archer]

You can also use a 2115 insert

[Zrt1200]

Here are a few pics of the Zenith kit. For crossbow arrows you do not use the steel end plate that comes with the kit. Now the Zenith kit does not come with a bushing for the crossbow arrows. But what you can do is use a piece of 1916 or simular arrow and hot melt glue it on to there bushings to make the correct size for crossbow arrows or make a insert that bolts in to the main zenith hub like BD1 did above. Bottom pic is a 1916 slide inside of a GT2 arrow.  DSC01020.JPG   89.79K   1 downloads  DSC01021.JPG   64.78K   1 downloads  DSC01026.JPG   80.15K   0 downloads

Edited by Zrt1200, 14 February 2012 - 01:52 PM.

[giannid]

I got the ideal and ordered it from H&S archer and he set me up with the inserts for lazer 2 and aramid shaft.  Works great and improved my accuracy on my strykeforce and strykezone 380.

[Zrt1200]

giannid, on 14 February 2012 - 10:17 PM, said:

I got the ideal and ordered it from H&S archer and he set me up with the inserts for lazer 2 and aramid shaft.  Works great and improved my accuracy on my strykeforce and strykezone 380.

Glad to hear that!!

[Pock]

I used this insert made from field point for GT II aluminum flat nock.