7 replies to this topic

[madarcher427]

any tips for getting bolts out of targets?Is there a better cocking device for it?does anyone silencer stuff?who makes the striker bolts?Iam thinking about ordering some cx bolts for it ,i thought i read something about aluminum nocks any certain tips recommended?they recommended ten rail lube .they also told me they stopped making the sz350

[BD1]

What kind of target are u shooting into? Use jigaloo for arrows & rail lube. U can use Alpha shok or Quads on the limbs from limb saver. They are Gold Tip II. Still making SZ350. I shortened my choking string to 36"

Edited by BD1, 05 February 2012 - 05:45 PM.

[randyxx75]

Mad , you shouldn't be shooting into "block" type targets , the speed of these bows literally "weld" the target material to the shafts... a real pain to get out !! a good  field point target is a spiderweb !

[Moon]

Also the Ballistic 450 target:-)

[madarcher427]

its a blob target, stops them dead but man are they tuff to get out.what does everyone use for broad head targets?

[Highlander]

Moon, on 07 February 2012 - 10:58 PM, said:

Also the Ballistic 450 target:-)

I bought the Block Crossbow target. Disappointed since the bolts go so far in you can only get one hand on them. Very difficult to get the bolts out. I'll look into the Big Shot Ballistic 450 target. One review stated an 8 yo had no problem pulling bolts out of it.  Thanks for the reference. 24"x24" target to boot with a replaceable cover.  

Edited by HighlandHunter, 08 February 2012 - 05:47 PM.

[madarcher427]

who makes that big shot ballistic?

[Highlander]

BIGshot Ballistic®

If you run a search with the above input, their sight should come up first.  

Edited by HighlandHunter, 08 February 2012 - 06:39 PM.