Edited by ID-Sasquatch, 23 May 2012 - 12:11 AM.
1
6 replies to this topic
#1
ID-Sasquatch
-
- Members
- 65 posts
Member
- LocationKamiah, ID
Posted 23 May 2012 - 12:06 AM
I have a Middleton DTM355 on order. What are most folks using for a nock, flat or moon? I have some GT Laser III bolts at 22" that I am thinking about cutting down to 20" and using brass inserts. I also have some 100 gr. NAP Thunderhead Edge Broadheads. I cannot use mechanical broadheads in Idaho. Any thoughts or suggestions would be welcome.
Middleton 355
GT III Bolt 190.5 grs, Brass Insert 110 grs, Blazer Vanes 18 grs, Firenock 34 grs, Nightmare Broadhead 96.4 grs
Total weight TBD grs. FOC TBD%.
KE @TBD FPS equalsTBD ft-lbs
HHA Optimizer Speed Dial
Aimpoint red dot scope
Bad River Outdoors MFO Crossbow Sight
GT III Bolt 190.5 grs, Brass Insert 110 grs, Blazer Vanes 18 grs, Firenock 34 grs, Nightmare Broadhead 96.4 grs
Total weight TBD grs. FOC TBD%.
KE @TBD FPS equalsTBD ft-lbs
HHA Optimizer Speed Dial
Aimpoint red dot scope
Bad River Outdoors MFO Crossbow Sight
#2
Tim50
-
- Members
- 1,762 posts
Senior Member
- LocationSW Pennsylvania
Posted 23 May 2012 - 06:32 AM
I shoot a 330 DTM. I'm shooting a flat nock on my 20inch Victory arrow with a 100gr G5 broadhead
Excal Exocet 200
Middleton 330 DTM
Winchester M88 - 284 Winchester
Marlin Wild West Guns Alaskan Guide - 457WWG
Middleton 330 DTM
Winchester M88 - 284 Winchester
Marlin Wild West Guns Alaskan Guide - 457WWG
#3
bski
-
- Members
- 277 posts
Member
Posted 23 May 2012 - 08:53 AM
Steel force phatheads 145
Shoot dimes out of the dtm
Shoot dimes out of the dtm
#4
ID-Sasquatch
-
- Members
- 65 posts
Member
- LocationKamiah, ID
Posted 23 May 2012 - 11:47 PM
Thanks for the information. I'll get some flat nocks on order. I'll keep the information on the 145 but I'll see how the 100 grs shoot first. What is the purpose of the heavier broadhead, FOC?
Middleton 355
GT III Bolt 190.5 grs, Brass Insert 110 grs, Blazer Vanes 18 grs, Firenock 34 grs, Nightmare Broadhead 96.4 grs
Total weight TBD grs. FOC TBD%.
KE @TBD FPS equalsTBD ft-lbs
HHA Optimizer Speed Dial
Aimpoint red dot scope
Bad River Outdoors MFO Crossbow Sight
GT III Bolt 190.5 grs, Brass Insert 110 grs, Blazer Vanes 18 grs, Firenock 34 grs, Nightmare Broadhead 96.4 grs
Total weight TBD grs. FOC TBD%.
KE @TBD FPS equalsTBD ft-lbs
HHA Optimizer Speed Dial
Aimpoint red dot scope
Bad River Outdoors MFO Crossbow Sight
#5
See4miles
-
- Members
- 431 posts
Member
- LocationWest Branch/Clio MI
Posted Yesterday, 08:53 AM
FOC is correct. there are several threads discussing it here. look a few up if you want to get more info on the "ifs and whys"
In the Wind......
#6
bski
-
- Members
- 277 posts
Member
Posted Yesterday, 02:57 PM
I was shooting the 145 with cx maxima kv 20 inch 25 grain inserts ......444 grain total
#7
the dog
-
- Members
- 110 posts
Member
Posted Today, 02:12 PM
I shoot 2219's out of mine, flat nocks, with 125 grain slick tricks , muzzy's , or field points
4" feathers with a slight offset,
good luck that thing is a killer. IMO no need to get fancy with carbons or expandable
cheaper and deadly accurate with the aluminum and fixed blade heads
4" feathers with a slight offset,
good luck that thing is a killer. IMO no need to get fancy with carbons or expandable
cheaper and deadly accurate with the aluminum and fixed blade heads
