Jump to content


Pock

Member Since 28 May 2010
Offline Last Active May 22 2012 12:03 PM

Posts I've Made

In Topic: Have a question for your TenPoint factory Representative. Feel free to ask...

10 April 2012 - 09:20 AM

About accudraw 50 rope.
I would like to know about Accu 50 rope , if it damage , can I change to 550 paracord ?

Thanks
Pock.

In Topic: Best targets for broadhead

22 March 2012 - 06:54 PM

rinehart 18:1

In Topic: What Crossbow Are You Planning On Getting This Year?

22 March 2012 - 06:53 PM

Parker Gale Force for my plan.

In Topic: String Serving

09 March 2012 - 07:38 PM

Hi Fuzzy

For loop I set tension around 6 lbs.

And end serving I set tension around 4.5 lbs

And center serving I set tension around 13-17 lbs , I not sure end up of tension, I start at 13 lbs and I increase tension after winding around 0.5 inch because it difficult to start at high tension. (I think end up this tension is around 16-18 lbs)

After finish I used Darton speed wax around center serving.

Before serving (end serving and center serving) I set tension of string around 300-350 lbs. (picture below : my tension jig)

Posted Image

In Topic: Serving material

08 March 2012 - 06:59 PM

My Vortex I used halo 024 for center serving,  you can  also use either of 024, 030 or 036 for center serving.