Hi..I'm new to crossbows..
I picked up a 120lbs crossbow a while ago..
It came with 3 alloy bolts...I have just got some carbon
bolts..BUT what weight heads would be the best for hunting
with a 120lbs crossbow..was going to get those 3 blade ones
but there is so meany choises in weight ...
What weight should I be looking at ??
what sort of FPE should I be able to get from it...
Pete
Bolt head weight
Started by peteNZ, Jun 17 2010 08:05 AM
8 replies to this topic
#1
Posted 17 June 2010 - 08:05 AM
#2
Posted 17 June 2010 - 10:38 AM
Most of us use 100 gr heads. I don't know what your manufacturer recommends but you want a FOC of approx 11 - 20% normally the higher the better for BH's.
Member of the Over The Hill Gang.

6 Point GT Flex, Easton Arrows
PSE Polaris, Easton Arrows
Muzzle Loaders and Modern Cartridge Toys
"An armed society is a polite society. Manners are good when one may have to back up his acts with his life." Robert A. Heinlein

6 Point GT Flex, Easton Arrows
PSE Polaris, Easton Arrows
Muzzle Loaders and Modern Cartridge Toys
"An armed society is a polite society. Manners are good when one may have to back up his acts with his life." Robert A. Heinlein
#3
Posted 17 June 2010 - 02:14 PM
How many grains does your arrows weigh?
Keep your trust in God; Your government has failed you miserably
Butch and Wendys Hunting Adventures.com
www.bowfishing with butch and wendy.com
Texas Crossbow Hunters Club
Texas Bow Fishing Association Director
HOG HUNTER DIVA EXTRAORDINAIRE
Butch and Wendys Hunting Adventures.com
www.bowfishing with butch and wendy.com
Texas Crossbow Hunters Club
Texas Bow Fishing Association Director
HOG HUNTER DIVA EXTRAORDINAIRE
#5
Posted 23 June 2010 - 12:39 AM
I am using a Horton Legend 150. What is the recommended weight of the total bolt with broadhead. I've been told anywhere's from 400gr-500gr. I can't find the info on the horton website. Any recommendations. I would like to switch from the Muzzys I've been using and find another 100gr or 125gr broadhead. The Muzzys never seemed to be consistant on shot placement.
#6
Posted 31 July 2010 - 06:41 PM
Picked up some 125gr field tios and I'm am dead on at up to 35yds. I put 7 bolts into a 2 inch circle. I even pulled a robin hood. It heat the bolt in the bag head on a richocheted to the right big time. It was awsome to see. I wish it would've stuck in there though so I had the exact proof. It hit a 2nd bolt while richocheting and broke the nock on that 1. So nnow I just have to decide which broadhead I'm going to go with. I'm stuck between a Rage 125gr and a 125 slick trick. I will not go back with the muzzy's again.
#7
Posted 31 July 2010 - 07:59 PM
Excuse me all but we need to get rid of the term "bolt", they are ARROWS! Happy Hunting!
Brian
Proud Member of Team "Bloody Bownen"
Ten Point Titan HLX
Barnett Jackal
Horton Yukon
Proud Member of Team "Bloody Bownen"
Ten Point Titan HLX
Barnett Jackal
Horton Yukon
#8
Posted 31 July 2010 - 08:40 PM
I'm not a fan of rage could never get consistant Grouping, I went and have had excellent success with Slick Tricks.
They are Arrows, "Bolts where used to pierce Armor"
Migabby
They are Arrows, "Bolts where used to pierce Armor"
Migabby
Slick Tricks
Boo String
Boo String
#9
Posted 31 July 2010 - 09:27 PM
The manufacturer's recommendations are normally found in the owner's manual. If you do not possess one, contact your manufacturer's service center. They should be able to help you. The warranty on some bows is tied to being at or above the total recommended arrow weight.
"I lift up my eyes to the hills. . .He will watch over your life. . .now and forever." Ps 121
Member-Over The Hill Gang
Member-Over The Hill Gang















