Crossbow Nation banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. General Crossbow Discussion
    I wonder how this Gorilla tough 80lb camo fishing braided line would work on top of center serving its .019" or 0.48mm it looks tuff and looks like it would work what are anyone's thoughts.
  2. General Crossbow Discussion
    This is about as level as I can get on centerpoint sniper the right cam is a tad off then the left looks good to me that's with a level at 90% to the rail cocked. And the timing looks good also what are your thoughts by the photos.
  3. General Crossbow Discussion
    Bunnyrabbit how does this string look to you after I put a shim in front end.
  4. General Crossbow Discussion
    Hi does any one know how many twist you do on the string and cable strings when installing them. Thanks
  5. General Crossbow Discussion
    I noticed on my centerpoint sniper 370 when cocked I measured from cam pin to flight rail one side is about a 1/8 of a inch longer my limbs are all the way in and tight I had cam lean at one time and had it fixed I'm wondering if one side of the yoke string has more twist then the other I'm...
  6. General Crossbow Discussion
    I noticed on my centerpoint sniper 370 when cocked I measured from cam pin to flight rail one side is about a 1/8 of a inch longer my limbs are all the way in and tight I had cam lean at one time and had it fixed I'm wondering if one side of the yoke string has more twist then the other I'm...
  7. New Member Introductions
    Welp..decided to figure out why cocking took 4 to 8 or more pulls to latch. Let youngest son hunt w/it. No blame here but ya know...anyhoo, took trigger box out and found this in the removal. Binding trigger linkage enough so safety catch wouldn't drop to allow holding latch to catch. Straighten...
  8. Barnett Crossbows
    2nd TS was way off ata.. advanced cables 3 5 full turns and 3 full turns on string. Went from 345fps to 389fps and holding true. Seems the new Barnetts need some serious adjustments check your gear guys. Thanks a ton BR
1-8 of 8 Results
Top