Crossbow Nation banner
1 - 3 of 3 Posts

·
Member
Joined
·
94 Posts
any idea how to remove them from from a evo x centerpunch ? Without damaging the arrow? Also does anyone know if the ones out of pro elites are the same diameter?
My Pro elites have the yellow receiver. According to the chart on the Alpha Brite nock package EXO-X Centerpuch and Pro elites both use the yellow receiver which has an arrow I.D. of 0.297. The Green receiver is for the Carbon Pro Lite and the Orange receiver is for the Aluminum XX75.
I would try using a metal rod of 1/8th inch and go through the tip to the nock and try to tap them out. Also, I believe there is a video on Tenpoints website or YouTube. Good luck
 

·
Registered
Joined
·
73 Posts
Discussion Starter · #3 ·
My Pro elites have the yellow receiver. According to the chart on the Alpha Brite nock package EXO-X Centerpuch and Pro elites both use the yellow receiver which has an arrow I.D. of 0.297. The Green receiver is for the Carbon Pro Lite and the Orange receiver is for the Aluminum XX75.
I would try using a metal rod of 1/8th inch and go through the tip to the nock and try to tap them out. Also, I believe there is a video on Tenpoints website or YouTube. Good luck
Thanks for the reply, guess my arrow was toast anyway a piece of carbon about and 1/8 inch wide and 5/16 long came out of the arrow glued to the receiver, ima chunk it, don’t wanna risk it
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top