Crossbow Nation banner

1 - 6 of 6 Posts

·
Registered
Joined
·
327 Posts
Discussion Starter #1
Is there anyway to remove them from factory BEE. I have tried using a rod and a hammer with no luck. Would like to reuse them.
 

·
Registered
Joined
·
13,242 Posts
Sounds like a voice of authority.;) I'd try that first.:)
 

·
Registered
Joined
·
327 Posts
Discussion Starter #5
Yes, get an 8/32 threaded rod heat it real hot the screw it in and apply a bit of twisting pressure

When it starts to move pull straight out then put it very quickly in water to cool it
Thanks for the idea!! Works like a charm.👍👍👍
 

·
Vendor
Joined
·
1,617 Posts
Thanks I’ll give that a try!
The process of using heat is not an exact science you can destroy the end of the arrow if you are not really careful.

I don't advise it unless there is no other option, but sounds like you were successful
 
1 - 6 of 6 Posts
Top