Crossbow Nation banner

1 - 2 of 2 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1
I recently purchased some blinking nocks for those late sunset afternoon hunts but I have tried as instructed to remove the factory nocks. The bolts are TenPoint EX-O carbon Bolts. YouTube says to use a metal shaft, push it through and tap with a hammer. Well one broken Nock later and bent metal rod , i can tell you they lied on the video1lol. Any suggestions?
 

·
Registered
Joined
·
523 Posts
You need a 1/8 solid steel rod 2 feet long and a rubber gripper of some sort to hold the arrow. This has worked well for me on the regular omni nocks. I've never tried it tho on the receiver that the new Alpha nock fits into but I would think it will work ok. Just depends on how well the receiver is glued in. If that doesn't work you can take a 19/64 drill bit and very carefully drill it out. My question is since the Evo-X Center Punch arrow is already lite stick ready, why don't you just get a 3 pack of the Tenpoint lite sticks and insert in the alpha nock and use it.
 
  • Like
Reactions: Fletcher
1 - 2 of 2 Posts
Top