Crossbow Nation banner

1 - 20 of 23 Posts

·
Registered
Joined
·
2,035 Posts
Discussion Starter #1
Hey all !!
I got another nemesis in for fixing and build a short cocking stirrup with mac daddy stopper posts .

First thing i got started on was the stirrup , here it is all done .
182120

next step is access the string pressure and install the aluminum bridges in the cable slide are .
182121

here are the bridges installed ready for milling .
182122

here it is in the mill ready for cutting .
182123
 

·
Registered
Joined
·
2,035 Posts
Discussion Starter #2
While i got it in the mill i am going to mill the roof of the riser slot 40 thousands higher , this provides room for the shims .
182124

here is the cable slot milled 3/16 higher and trimmed to fit , to relieve cable pressure .

182125
 

·
Registered
Joined
·
2,035 Posts
Discussion Starter #3
Well i put the bow back together with .030 shims in the riser and it is not enough , i need to go another .030 .
so i am going to mill a shim out of aluminum and start at .080 , this way i can take a little at a time to get it right .

Just a heads up . all Nem owners, keep an eye on the rubber stops , this bow had 2 blows rubber stoppers .
182126
 
  • Like
Reactions: Ironminer

·
Registered
Joined
·
2,544 Posts
Fixing to be ANOTHER happy Nemesis owner!!! Looks great Tim!
 

·
Registered
Joined
·
2,035 Posts
Discussion Starter #11
Well i think i got this one wrangled .
added .100 in shims , the most yet on any of these i have done .
re shimmed the cams to keep them high in the limb fork .
polished the latch claws .
here is the string serving when i began , i rubbed wax into it .
182173

182174

this is serving at 16 shots .
182175
 

·
Registered
Joined
·
2,035 Posts
Discussion Starter #12
serving at 31 shots .
182176

serving at 56 shots no wax between shots .
182177

182178
 

·
Registered
Joined
·
2,035 Posts
Discussion Starter #13
I waxed the string when i was done and it smoothed back out to what it looked like in the beginning .
This is Jerry 's super serving by the way . I think waxing every 20 shots and it will last a long time !!!!
here is the shim installed .
182179

182180
 

·
Senior Member
Joined
·
8,450 Posts
I like that bow!
 
  • Like
Reactions: burky247365

·
Registered
Joined
·
2,966 Posts
Hell of a job Tim. When you are done with my silver I might just start looking for a Nemesis 480 to send your way
 

·
Registered
Joined
·
845 Posts
Man, what a shim. It makes you wonder.....
 
  • Like
Reactions: burky247365

·
Registered
Joined
·
2,328 Posts
Very nice work Tim!

Glad to see at it and living the dream once again,,, or at least a little part of it!
 
  • Like
Reactions: burky247365 and Rit
1 - 20 of 23 Posts
Top