Crossbow Nation banner
1 - 20 of 184 Posts

· Premium Member
Joined
·
4,454 Posts
Discussion Starter · #1 ·
Hey guys !!
I was contacted by Tnmtns ( Jeff ) here on the site and he was interested in a Midnight stock with removable crank .
We talked on the phone about a new stock and removable crank + see if i can do something with the severe string pressure on the barrel . He also stated he wanted something no one has with a short foot stirrup as he is a crank only guy .

Here is Jeff's bow as it showed up at the house .
Gun Machine Vehicle Airsoft gun

after getting the bow and looking it over , thinking the whole time he wanted a 1 of a kind i called him on the phone and talked him into a new barrel with an integrated short foot stirrup and charcoal laminate adjustable stock .
He agreed ,and here we go !!!!!
 

· Premium Member
Joined
·
6,190 Posts
Yep,here we go!
 

· Premium Member
Joined
·
4,454 Posts
Discussion Starter · #6 ·
Next i laid out where the riser goes through the barrel and the cable slide area .
Then milled those areas and fit the riser ,strung it up to check string pressure and bingo , we are cooking with gas know !!!!
Wood Table

 

· Premium Member
Joined
·
6,190 Posts
Man, there are some talented individuals on this site.

Blessings.........Pastorjim

Sent from my SM-N950U using Tapatalk
That's an understatement!!! Just wait for it! LOL
 

· Banned
Nemesis 480 & DeathStalker 380, I live near Greensburg PA. I enjoy building custom strings
Joined
·
7,724 Posts
I'm considering on having this done to mine also ! It really upsets me about the serving always busting on the left side and the string pressure over the barrel doesn t help this at all. There's a tilt in the riser and this is what's causing the string to bust on the left side only ! I called Rex about this but didn't get anywhere. Looks like Jeff did the next best thing ! I might follow suite !
 

· Premium Member
Joined
·
6,190 Posts
I'm considering on having this done to mine also ! It really upsets me about the serving always busting on the left side and the string pressure over the barrel doesn t help this at all. There's a tilt in the riser and this is what's causing the string to bust on the left side only ! I called Rex about this but didn't get anywhere. Looks like Jeff did the next best thing ! I might follow suite !
I made several attempts with Rex myself to get the issues resolved and was told that my concerns were unfounded and the down pressure was " normal " and no need to send it in to Scorpyd! Well,I wasn't buying it,so I took matters into my own hands dealt with it my own way. Tim took the bow apart,went over the issues (step by step) with me on the phone and asked how I wanted to proceed. This thread is a result of that!!!
 

· Registered
Joined
·
640 Posts
I'm considering on having this done to mine also ! It really upsets me about the serving always busting on the left side and the string pressure over the barrel doesn t help this at all. There's a tilt in the riser and this is what's causing the string to bust on the left side only ! I called Rex about this but didn't get anywhere. Looks like Jeff did the next best thing ! I might follow suite !
Is this issue exclusive to the Nemesis? I ask because I was considering a DS 420.

Sent from my SM-N950U using Tapatalk
 
1 - 20 of 184 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top