Crossbow Nation banner

1 - 4 of 4 Posts

·
Registered
Joined
·
125 Posts
Discussion Starter #1
I have a 2016 Orion.
Towards the end of last season it seemed like my bolts are not laying flat on my barrel.
It seemed to be worse than normal.
Its not the bolts.
Could something be warping or twisting on the bow.
I want to address it before the season starts if there is a real issue.
Thanks for any info
 

·
Registered
Nemesis 480 & DeathStalker 380, I live near Greensburg PA. I enjoy building custom strings
Joined
·
7,304 Posts
Take a straight edge to the rail....
Check the arrow retainer pressure...
Check to see how the nocks are fitting onto the string and how low it's sitting into the track....
These are the only things I can think of that would be causing your issue...
 

·
Registered
Joined
·
3,450 Posts
Burky247365 is the Scorpyd king! Send him a pm in case he misses this thread. He knows these bows inside and out.
 

·
Registered
Joined
·
2,473 Posts
You might need to heat the arrow retainer with a hair dryer and bend it some so it holds the arrow down flat on the barrel. They do bend from the sled when cocking the bow if it gets pulled up by the sled when cocking the bow.
 
1 - 4 of 4 Posts
Top