Crossbow Nation banner

1 - 6 of 6 Posts

·
Registered
Joined
·
131 Posts
Discussion Starter #1
I posted some pics of my parker cranking device i put on my scorpyd velocity and mentioned i replaced the rope with material i bought from west marine in califoria. I have had some questions from people wanting to know what the material was, so here is what the material is.
SAMSON ROPE AmSteel Dyneema® AS-78 Single Braid
IT has fantastic breaking strength my 3/16 i use has a breaking strength of 5400 # so if you need replacement rope for any kind of cocker i highly reccomend this stuff.
 

·
Member
Joined
·
374 Posts

·
Registered
Backinda woods of Maine
Joined
·
595 Posts
I need to replace the rope on my Excalibur stringers. Any suggestions. Tried paracord and some Napa pullcord rope...to stretchy.
Thanks
Oncebitten
 

·
Registered
Joined
·
131 Posts
Discussion Starter #5
this is what i use for rope cockers winch cables and pull ropes for treestands tie off ropes for tree stands just about anything haven't had any problems with stretch at all.
 

·
Registered
Backinda woods of Maine
Joined
·
595 Posts
Thanks. Just went and ordered some to replace the rope on my stringers. Had one of these stringer ropes break when adjusting brace height on my Axe. This will prevent it from happening again.
Take care
Oncebitten
 
1 - 6 of 6 Posts
Top