Crossbow Nation banner

Swacker 3 blade.

1201 Views 11 Replies 8 Participants Last post by  timbikeride
Still experimenting what's y'alls take on swacker 3 blade expandable? Bear saga 370.
1 - 12 of 12 Posts
I would like to know this myself, I have some I bought, I've read where they don't fly well, I will be shooting the tenpoint shadow nxt. I like the offset blades, guess I just need to shoot a deer with one and see what happens
I just started playing with them. I shot them the other day with good results out of a KI ripper 415. I need to put in a lot more time at different distances.
I never met a crossbow that didn't shoot the 3 blade Swhackers lights out! I have killed deer, turkeys, bears, and wild hogs with them and they always flew great and performed great as well.
  • Like
Reactions: 1
They shoot good for me out of my Matrix 350. I've only shot 1 with them. It went about 35 yards and was done. The head and arrow are in the quiver, ready to kill again.
Leaf Adaptation Tree Plant Soil
See less See more
I would like to know this myself, I have some I bought, I've read where they don't fly well, I will be shooting the tenpoint shadow nxt. I like the offset blades, guess I just need to shoot a deer with one and see what happens
Atleast use one for practice to see where theyre hitting before slinging one at a deer. You don't want to make a bad shot loosing your trophy buck!;)
  • Like
Reactions: 1
I started using them 2 years ago and they fly great out of my Storm same as fieldpoints out to 50 yards
I have takin 3 deer with them and they haven't ran over 40 yards and have a great blood trail

The practice head that came with mine was junk it wouldn't spin true si I sacrificed a good head to sight in with
I started using them 2 years ago and they fly great out of my Storm same as fieldpoints out to 50 yards
I have takin 3 deer with them and they haven't ran over 40 yards and have a great blood trail

The practice head that came with mine was junk it wouldn't spin true si I sacrificed a good head to sight in with
No need to sacrifice a head or blades. Just tape the blades closed with electrical tape like I did in the video above.
  • Like
Reactions: 1
Well I did some testing 3 blade vs 2 blade swhacker. I'm shooting KI Ripper 415 with spynal Tapps Weight around 435
Twenty yards 2 blade 3/4 inch low dead center 3 blade 3/4 low 1/2 inch to the left. Thirty yards was pretty much the same. I didn't have time to go out farther. This was with three different arrows and switching heads randomly.
I got to shoot both 2 and 3 blades again today out two forty yards. They were about the same as thirty just a touch lower. I repeated the shoots over at the same target and they were touching the holes from the first shots. They both fly great a little different than field points. With a little scope adjustment they would be on the money. So tell me which would you chose. 2 or 3 blade.

Thanks
I got to shoot both 2 and 3 blades again today out two forty yards. They were about the same as thirty just a touch lower. I repeated the shoots over at the same target and they were touching the holes from the first shots. They both fly great a little different than field points. With a little scope adjustment they would be on the money. So tell me which would you chose. 2 or 3 blade.

Thanks
I shoot the 100gn 2"cut, The 100gn 3 blade and the 125gn 2.25" cut. I haven't killed any with the 2.25" cut yet. Only 1 so far with the 3 blade. I've killed about 10 with the 100gn 2" cut 2 blade. I shoot them out of 3 different bows and have confidence in all of them. So imo its a toss up. Here's damage from a 100gn 2"cut 2 blade
Red Plant Tree Flower Flesh
See less See more
I got to shoot both 2 and 3 blades again today out two forty yards. They were about the same as thirty just a touch lower. I repeated the shoots over at the same target and they were touching the holes from the first shots. They both fly great a little different than field points. With a little scope adjustment they would be on the money. So tell me which would you chose. 2 or 3 blade.

Thanks
I have shot any slackers, but always preferred three blades over two. It just seems like the three blade even with a smaller cutting diameter "should" do more damage with the increased cutting area. That may or may not be the case in reality however.
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top