[scienceguy]

PM sent

 

[lostarrow]

Pm you back

 

[Pastorjim]

Are you saying that the quiver will attach to a picatinney rail?

Sent from my SM-N950U using Tapatalk

 

[lostarrow]

Yes.there is a small picatinny rail ,that comes with it ,that attaches to the bottom ,front of the bow,then the mount attaches to that.im going to find a photo and post it

 

[Pastorjim]

Yes.there is a small picatinny rail ,tha come with it ,that attaches to the bottom ,front of the bow,then the mount attaches to that.im going to find a photo and post it

I'm wanting it to attach to a Barnett TS370. The one that came with the bow is completely useless. But you can't find anything to fit the Barnett because they use a picatinney rail to attach everything.

Sent from my SM-N950U using Tapatalk

 

[lostarrow]

Yes.there is a small picatinny rail ,tha come with it ,that attaches to the bottom ,front of the bow,then the mount attaches to that.im going to find a photo and post it

 

[lostarrow]

This is the picatinny rail that comes with it.im assuming if you have a picatinny rail already it should attach direct to it.

 

[lostarrow]

Are you saying that the quiver will attach to a picatinney rail?

Sent from my SM-N950U using Tapatalk

Pm you back

 

[CRSRon]

So how are you going to crank it without the supplied crank ??

 

[lostarrow]

I have more then one crank

 

[CRSRon]

I have turbo s1 also. I tried to use the pin to release carriage from string but cannot get holes to line up to release it. Have you tried to do that ?? I live about 70 miles from them and may stop in with it to see what issue is. Any thoughts if I am doing something wrong.???Thanks

 

[lostarrow]

My crank handle ,doesn't have a pin.the holes on my bow do line up.good luck with yours

 

[CRSRon]

Thanks. My bow is very low serial number so maybe they screwed up assembling. Everything else is ok.

 

[lostarrow]

Question.does your string touch the barrel or does it have a gap like a 32" .can you see a space between the string and the barrel.

 

[CRSRon]

I will have to let you know. The last time I shot it I hooked the carriage on the string, it started raining and I never fired it, that as when I tried to release the string from the carriage and could not. I will shoot it out and let you know. I think is has a gap but not positive. I do not know if it matters since the carriage holds it off the rail and when it shoots the nock holds it off the rail.
Have you had issue ??

 

[lostarrow]

No issue.just doesn't look right. It should touch the rail,but it does not.bow shoots fantastic dough.

 

[CRSRon]

Shot mine. It does have slight gap, I can see daylight under it, .032 I am guessing as I did not measure. I think there should be a gap so string stays centered and not dragging on rail. My wicked ridge 360 had lots of contact on rail, a worn out string waiting to happen. With the gap it keeps just slight down pressure when in the nock so it does not ride off rail. I like its position. But my holes for releasing carriage do not line up. I usually shoot it out but that's a feature I wanted to be able to use if necessary so I will have to stop in and have them look at it. Otherwise it shoot great.

 

[lostarrow]

Got it thanks