Crossbow Nation banner

1 - 6 of 6 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
I have a R26 that has has a cable right in the middle of
the dots on left side and touching the front dot on the
side. I can't seem to tune the crossbow. Any suggesti
20200920_112548.jpg
ons?
 

Attachments

·
Registered
Joined
·
428 Posts
I have a R26 that has has a cable right in the middle of
the dots on left side and touching the front dot on the
side. I can't seem to tune the crossbow. Any suggesti
View attachment 184623 ons?
Take your rt. cables off where they anchor to the barrel and put 1 turn clockwise on each top and bottom. Unpress it and check it . You will probably need 2 turns. Once they are both centered measure your axle to axle. I dont remember the spec on the R26.
 

·
Registered
Joined
·
1,893 Posts
Looking at the pics you have some frieghing. I would replace them. I wouldn't be bother messing with timing until they are replaced.
 

·
Registered
Joined
·
1,893 Posts
That would be a good idea. Some of those strands look broken. I'd hate to see your R26 broken from a cable failure.
 
1 - 6 of 6 Posts
Top