After the problems folks had with the ravin premium quiver ( including myself ) I decided to make a fix for it. I like the Tenpoint quiver better anyways. I had the little cheap plastic ravin quiver that comes with them.i measured center to center of the plastic knobs so I would know where to drill the new holes. I took an oscillating saw and cut off the plastic knobs from the quiver. I was able to use one of the existing Tenpoint holes and then had to drill one extra to get it to line up correctly. Took a small drill bit and drilled holes in the center of the back of the plastic knob. Took two small black crews and screwed into the quiver and through the center of the knob hole I drilled. Tested it out and works perfect. Much better mouse trap than the ravin premium quiver. I don’t really like the black and orange look on the ravin xk7 camo. Wished they made a camo version. Yes I know I am ocd. I can live with black. I do have a good friend that does cerakoting and he has camo ? 🤔. It looks like the Tenpoint came that way
![Image]()
![Image]()
![Image]()
Bigchiefchoctaw
Modified a Tenpoint quiver for a ravin.
1 reading
After the problems folks had with the ravin premium quiver ( including myself ) I decided to make a fix for it. I like the Tenpoint quiver better anyways. I had the little cheap plastic ravin quiver that comes with them.i measured center to center of the plastic knobs so I would know where to drill the new holes. I took an oscillating saw and cut off the plastic knobs from the quiver. I was able to use one of the existing Tenpoint holes and then had to drill one extra to get it to line up correctly. Took a small drill bit and drilled holes in the center of the back of the plastic knob. Took two small black crews and screwed into the quiver and through the center of the knob hole I drilled. Tested it out and works perfect. Much better mouse trap than the ravin premium quiver. I don’t really like the black and orange look on the ravin xk7 camo. Wished they made a camo version. Yes I know I am ocd. I can live with black. I do have a good friend that does cerakoting and he has camo ? 🤔. It looks like the Tenpoint came that way
![Image]()
![Image]()
![Image]()
I was able to put my ten point quiver on my ravin r29x crossbow with a big bird top mount quiver brackets In order for it to be a perfect fit I would need to grind down a couple things where it would sit flush the bird button is right beside the edge of the quiver and needs to be modified. So I was looking at the ravin quiver and the Tenpoint. I realized I could take the bottom grippers off the Tenpoint and the holes lined up perfectly where you could slide the ravin quiver bracket up inside the finger like it was on the Tenpoint. I had to bolt them with a recessed black screw and a stainless locking nut. It works perfectly now with the ten point finger on the ravin quiver.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
