[Martymig]

Thanks Vent ! This clears it all up for me.
Like you said, my DS 380 had the gen 5 cams until I had warranty work done on it and it came back with gen 6 cams on it and seemed to perform better but that could've been my imagination also. I don't own a chronograph so it's only a guess. The arrows were hitting a little higher though.

 

[Martymig]

Very informative post and nice collection you have there! Those Gen 7's are built like a tank!

This is also a good place to check the timing of your cams by comparing them to the photos in this post. Especially for the Nemesis.

 

[Martymig]

That depends on a few things, like what bow they are on, what limbs are on it, and the ATA. The Deathstslkers have 2 different ATA's, 2 different types of limbs, with 4 different poundage ratings. The Nemesis is narrower yet, and they have different limb angles.

The Gen 4 cam is mounted in a Ventilator Extreme, which is a wider ATA, with different limb angles.

I guess I should have also listed which bow the cams were installed in with the pic?

Gen 1: 2009 RDT 125 split limb, Gordon Glass
Gen 2: 2010 RDT 165 solid limb, Barnsdale
Gen 3: 2012 Ventilator 150, Barnsdale
Gen 4: 2015 Ventilator Extreme 175, Barnsdale
Gen 5: 2017 Deathstalker 380, 130#, Gordon Glass BP
Gen 6: 2018 Deathstalker Grim Reaper Edition 150, Barnsdale
Gen 7: 2019 Nemesis 480, 185#, Barnsdale

So timing will be different as far as hole relation to the limb in an Aculeus vs a Deathstalker with Barnsdale limbs vs a Deathstalker with GG BP limbs, etc,.

Yes thank you. I already knew which was which in the photos as far as the DS 380 and Nemesis 480/185. So I didn't have to guess. But I guess for someone that is not acquainted I'm such might make the mistake of confusing which is which. I'm glad you added this information. I didn't think about that when I shared my comment. Glad you did. Thanks.
I'm still trying to figure out what BP stands for ?

 

[Martymig]

I'm all into it ! I love it ! I was like that with Corvettes while I was younger and growing up. My uncle had one and my Dad had one so I learned all about them. Now it's Scorpyd I want to get to know all about.

 

[Martymig]

Yes, I agree, Ventilator has been a very big help and I appreciate him sharing his knowledge. We are fortunate to have him on this forum.