This works well too.

 

Robert,
Although an alien wrench can obviously get the job done, it should be noted that the Ravin trigger sear is spring loaded. As a result, you don't want to push in too far or it could be problematic.
My tool has a built-in stop so you can't push it in too far. It's also made of carbon infused nylon so you'll never scratch a thing on your expensive Ravin. It's also fully guided by the rail edges so it will work the first time every time.
I made this tool because it's ideal for use in changing out AS strings. Once they are installed and you've adjusted the cables to remove cam lean and than synched and timed your cams, the crossbow can now be cocked and decocked a few times to settle the cables and string in the cam grooves.
Now the SLR tool can be used to release the string from the mobile carriage before using my Nock Centering tool to place the nock notch in the correct location before shooting your first arrow.

With all do respect, I don't design tools just to sell them. I design tools that helps me shoot my Ravins will more repeatable accurately. I then offer them to others if they're interested. Like you and many other CBN members, I'm retired and certainly don't want another full time job. If I did, I wouldn't have retired because I could have made a heck of a lot more money then playing around with a silly 3D printer.

 

I was just letting folks know there is another way to do it with tools they already have on hand. I will probably get one of your tools next time I order from you.

 

I'm about to get some bigbird customizations too, I have been using the wrench but riflenut's videos helped me see how much better having the right tool for the job is. Also, there's potential with this tool to make something that can fire the bow from less than full draw, which intrigues me for small game.

 

Yeah I understand the danger and risk, just an idea. I believe it is possible, just not smart.

 

I ca

I have an ideal to do what you want and it's not that difficult. If I were Ravin, I would make sure to get a patent on it before someone else does.

 

The carrier could fly back and hurt you or the bow. I don’t recommend. Yeah it’s possible but with huge risks. Get a sling shot. Better idea.

 

I just want one toy/tool to do it all haha. It makes sense that something with the power to take down elk or bear would be overkill for squirrels and chipmunks, but it doesnt have to be that way.

The stock scope is set to change targeting based on the FPS dial, it seems like they may be working on or at least anticipating a development like this. Imagine markers on the rail to show you how fast your arrow will fly based on how far you've cocked it, dial in that fps on your scope and bam, now a top end high fps xbow with a ton of utility. Transfer from stump shooting to big game shooting with a crank of the handle and a spin of the scope.

This would excite me more than them surpassing 500fps.

 

BigBird, where can I buy this tool at?

 

Nice job BB1

 

Thanks Ramrod,
Between SLR tools, Trigger shoes, Nock Centering tools, Bubble levels, stock spacers and extensions, loose stock brackets and rear crank handle holders, I'm way busier than I want to be this time of year.
It's a darn good thing I don't have a website or else I'd have no time at all for hunting.
I'd like to find time to make a few Ravin stirrups as well but it's wishful thinking right now.

Oh well, it's a heck of a lot better than having nothing to do other than arguing about whether a crossbow projectile is called an arrow or a bolt. Or worse yet, talking about politics.

 

I have this tool and it works great. I’d recommend painting a bright color on top to remind you to take it out before you crank the carriage back.

Black on black is hard to see - I did it twice but not since I painted it.

 

I got bigbird1’s string release tool shortly after getting my R10 and I have’t used a discharge shaft since.

I keep a short broken piece of shaft fitted with a Ravin nock and bushing in the carrying case to release the ADF after every hunt.

 

I need one. Bigbird1 please reach out to me.

 

I’ll send him a PM, you might not have enough posts to contact him.

 

Yeah I don’t. Don’t understand CN theory here. Been on AT for 15 years with hundreds of post and plenty of sales. But can’t message someone here 🧐

 

Thanks

 

I sent Bigbird a PM the other day. If he didn’t respond to you maybe he put me on his Ignore list. Sorry.

 

Tim,
I try not to ignore anyone because we all are entitled to our own opinions. I did get your PM and appreciate it very much but Squibbkicks had already PMed me.
All the best.
BB

 

I’d also like to have one of these but it won’t let me pm @bigbird1

 

Read the rules, You need a lot more posts before it will let you PM or post in the classifieds.

 

contact

bigbird1

 

Info on tool?

 

That is a neat upgrade