Crossbow Nation banner

Serving--Re-serving the string

9.3K views 22 replies 11 participants last post by  Todd Begg  
#1 ·
Any one doing this ??
 
#6 ·
BigBowMan said:
There is no reason to put leaches in a crossbow string. They will not quiet the bow and most just tear and fly off. If you are insisted to do so, you should take pressure off the string in a press to insert them. Good luck

Sent from my SM-N910V using Tapatalk
I don't intend to, just saw Ted do it.:D Personally, I don't think sound is going to matter much anyway at 300+fps under 30 yards.

Sent from my ZTE-Z990G using Tapatalk 2
 
#7 ·
I have reserved the string on my recurve, build a pipe jig with hooks and threaded bolts to tension the string. Went on line and learned how to reserve. My compound was reserved by taking off the front end and reserving by hand and using no serving tool, it has held up very well. That was before I constructed a press. Next time I will remove the string and serve it properly. If you attemp to reserve, make sure you get the proper size of the string for serving.
 
#8 ·
The string needs to be served under pressure (untwisted about 6 turns and stretched) - at least 200#, my last one was under about 300#. There should be a tutorial here somewhere by Boo that explains the process pretty well. Per his suggestion I used .036" Angel Majesty serving from Dan Miller.
 
#11 ·
#12 ·
I made a jig that Boo has instructions for on his web site.I believe its Booscustomstrings.com Easy to make.I've put center servings on all my bows and served the ends on another.from what I understand you can reserve the center without taking the string off though.
 
#15 ·
Stalker said:
I made a jig that Boo has instructions for on his web site.I believe its Booscustomstrings.com Easy to make.I've put center servings on all my bows and served the ends on another.from what I understand you can reserve the center without taking the string off though.
I'm sure you can but, somewhere in Boo's video he untwists the string about 6 turns and then puts it under tension - not sure if he indicates 200# or more. One would think that an untwisted string under pressure would make the diameter smaller during that period, allowing for a tight serve. When the twists were added back and the force reduced, that should return the string to it's original diameter and make the serving even tighter.

I saw somewhere on the Viper-X/ABB website that they tension their strings under 450# - they must do it for a reason.
 
#16 ·
Stalker said:
I made a jig that Boo has instructions for on his web site.I believe its Booscustomstrings.com Easy to make.I've put center servings on all my bows and served the ends on another.from what I understand you can reserve the center without taking the string off though.
I think this is the jig your referring to.
 

Attachments

#18 ·
myayers said:
This is the layout drawing. Not sure if this will work with a Matrix string using the 44" long dimension.
(function(){var g=this,h=function(b,d){var a=b.split("."),c=g;a[0]in c||!c.execScript||c.execScript("var "+a[0]);for(var e;a.length&&(e=a.shift());)a.length||void 0===d?c[e]?c=c[e]:c=c[e]={}:c[e]=d};var l=function( :cool:{var d=b.length;if(0{var d=window;if(d.addEventListener)d.addEventListener("load",b,!1);else if(d.attachEvent)d.attachEvent("onload", :cool:;else{var a=d.onload;d.onload=function(){b.call(this);a&&a.call(this)}}};var n,p=function(b,d,a,c,e){this.f=b;this.h=d;this.i=a;this.c=e;this.e={height:window.innerHeight||document.documentElement.clientHeight||document.body.clientHeight,width:window.innerWidth||document.documentElement.clientWidth||document.body.clientWidth};this.g=c;this.b={};this.a=[];this.d={}},q=function(b,d){var a,c,e=d.getAttribute("pagespeed_url_hash");if(a=e&&!(e in b.d))if(0>=d.offsetWidth&&0>=d.offsetHeight)a=!1;else{c=d.getBoundingClientRect();var f=document.body;a=c.top+("pageYOffset"in window?window.pageYOffset:(document.documentElement||f.parentNode||f).scrollTop);c=c.left+("pageXOffset"in window?window.pageXOffset:(document.documentElement||f.parentNode||f).scrollLeft);f=a.toString()+","+c;b.b.hasOwnProperty(f)?a=!1:(b.b[f]=!0,a=a=b[e].j)&&(b[e]={rw:a.width,rh:a.height,ow:a.naturalWidth,oh:a.naturalHeight})}return b},t="";h("pagespeed.CriticalImages.getBeaconData",function(){return t});h("pagespeed.CriticalImages.Run",function(b,d,a,c,e,f){var k=new p(b,d,a,e,f);n=k;c&&m(function(){window.setTimeout(function(){r(k)},0)})});})();pagespeed.CriticalImages.Run('/ngx_pagespeed_beacon','http://www.crossbownation.com/forum/index.php?s=296567d224b0887fb9c020f57deaeb6f&app=forums&module=ajax§ion=topics&do=quote&t=34482&p=367985&md5check=0ef50c21eb49d23217756c8bc514aad6&isRte=1,bJ85fm6IhW,true,false,-LItO_k5x8I');
Image
String Jig Drawing.jpg&&0){for(var>
I actually made mine 48" wide.I just use locking chain links or heavy duty S hooks to make up length differences if needed.I put 2x4 feet on mine and a handy tray to hold accessories.I made it 48" so I can C-clamp it to my work desk
 
#19 ·
Stalker said:
I actually made mine 48" wide.I just use locking chain links or heavy duty S hooks to make up length differences if needed.I put 2x4 feet on mine and a handy tray to hold accessories.I made it 48" so I can C-clamp it to my work desk
Sounds like you were thinking out of the box. I would like to see a pic of it if you have one.
 
#20 ·
myayers said:
Sounds like you were thinking out of the box. I would like to see a pic of it if you have one.
I wish I could but my pc is screwed up and I cant post pics.It looks just like the one you posted.I put a 2x4 on each end about 14 inches long for feet. I screwed them to the bottom 2x4 from the bottom to attach them.I made a the tray out of a piece of 1/4" plywood and put 1/2"x 3/4 " edging around it to keep things from falling out Its about 5"x12". I screwed it to the bottom 2x4 in the center.I didn't add it until I found myself searching for my marker, razor blade,wrench,lighter etc lol.Boo had feet in his diagram but I dont see them in the fished product lol.I also made mine a little taller for more clearance but not much maybe 2".I didn't want it to be too weak.
 
#21 ·
Sounds good. When the weather warms up some and the snow melts so I can get to my pole barn where my wood working tools and lumber are I'll build one. Thanks for the info. :)
 
  • Like
Reactions: Stalker
#22 ·
Ive shot my bow ALOT and still dont have issues with servings. I do add a drop of superglue on all serving ends before I start shooting though. Not sure if that helps but it certainly doesnt hurt. I make sure it's always waxed and I have change the string once a year whether it needed it or not. I still hang onto the old strings cause there's nothing wrong with them and theyll make good spares.